Filter
Top Products
6
Attaching the pedestal to TV
■
Assembling the pedestal
[TC-58PS14 (TBLX0102)] [TC-65PS14 (TBLX0126)]
Fix securely with assembly screws
A
. (Total 4 screws)
Tighten screws firmly.
Fix securely with assembly screws
A
.
(Total 6 screws)
Tighten screws firmly using
Allen wrench
C
A
L
R
Pole
Front
Pole
Base
A
C
Pole
Front
Pole
Base
■
Set-up
Carry out work on a horizontal and level surface.
Tighten screws firmly.
B
Fix securely with assembly screws
B
.
(Total 4 screws)
Rear side
Arrow
mark
Pole
Hole for pedestal
installation
Pole
Base
Bottom view
(Image: TC-58PS14)
Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and
personal injury may result.
Caution Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and
personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury
may result. Contact your nearest Panasonic Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly
tightened during assembly, the pedestal will not be strong enough
to support the TV, and it might fall over and become damaged, and
personal injury may result.
AC cord connection
To attach To remove
Insert it firmly until the
tabs on both sides click
into place.
Keep pushing both
side snaps and pull
down
Accessories
Assembly screws
A
(for 58”)
M5 × 25 (Silver) (4)
(for 65”)
M5 × 30 (Silver) (6)
B
(for 58”)
M5 × 30 (Black) (4)
(for 65”)
M6 × 25 (Black) (4)
Poles (2)
(for 58”)
L
R
L
or
R
is
printed at
the bottom
of the poles.
(for 65”)
Front
Back
Base (1)
(for 58”)
(for 65”)
Allen wrench
(included tool only for 65”)
C