Panasonic TC-P50ST60 Flat Panel Television User Manual


 
11
Attaching the pedestal to TV
Assembly screws (black) Bracket Base
(7) (for 50")
(12) (for 55"/60"/65")
M5 × 16
Assembly screws (black) Neck
(4) (for 50")
M4 × 10
Attaching the pedestal
5
3
1
2
4
TC-P50ST60 TC-P55ST60
TC-P60ST60
TC-P65ST60
A
A
C
D
E
A
B
(for 55"/60"/65")
(for 50")
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using
the wall-hanging bracket or repacking the TV.
Remove the assembly screws (for 55"/60"/65") /
(for 50") from the TV.
Lift the TV from the pedestal.
Remove the assembly screws from the bracket.
Remove the assembly screws from the bottom of the
base and pull out the neck.
Warning
Do not disassemble or modify the pedestal.
Otherwise, the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than that provided with this TV.
Otherwise, the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your
nearest Panasonic Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal
will not be strong enough to support the TV, and it might fall over and become damaged, and personal
injury may result.
When removing the pedestal, do not remove the pedestal by any methods other than the specified
procedure. (Above)
Otherwise, the TV and/or pedestal may fall over and become damaged, and personal injury may result.