Filter
Top Products
17
Quick Start
Guide
First Time Setup
■
Press to exit from
a menu screen
Note
To change setting
(Language/
ANT/Cable setup/
Network setting/
VIERA CAST setting/
Clock/Input labels)
later, go to Menu
screen
(p. 36)
Select “Auto program”
Cable
ANT/Cable setup
ANT in
Auto program
next
select
Select scanning mode (ALL channels/Analog only/Digital only)
Sl OK
Auto program
All channels
Analog only
Digital only
ok
select
Auto program
Progress
Number of analog channels
Number of digital channels
8%
10
0
Press RETURN to quit.
RETURN
Start scanning the channels
Available channels (analog/digital) are automatically set.
All channels: Scans digital and analog channels
Analog only: Scans Analog channels only
Digital only: Scans Digital channels only
Confirm registered channels
program
CancelApply
Caption Favorite Add
...
...
Yes
...
...
Yes
...
...
Yes
l
select “Apply”
ok
If OK is not pressed after selecting “Apply”, the channels will not be saved.
The channel will be saved when no operation is performed for 60 seconds and
the “Manual program” menu will also exit automatically.
If you perform scanning more than twice, previously saved channels are erased.
Network setting
First time setup
Language
VIERA CAST setting
Network setting
Clock
ANT/Cable setup
Input labels
select
ok
Network setting (p. 44-45)
VIERA CAST setting
First time setup
Language
VIERA CAST setting
Network setting
Clock
ANT/Cable setup
Input labels
select
ok
VIERA CAST setting (p. 46-47)