Filter
Top Products
PC
16:9
Italiano
Español
ENGLISH (US)
English (UK)
Deutsch
Français
OSD Language
SetSelect
12
Power On / Off
Connecting the AC cord plug to the Plasma Display.
Fix the AC cord plug securely to the Plasma Display
with the clamper. (see page 8)
Connecting the plug to the Wall Outlet
Notes:
• Main plug types vary between countries. The power plug
shown at right may, therefore, not be the type fi tted to your
set.
• When disconnecting the AC cord, be absolutely sure to
disconnect the AC cord plug at the socket outlet fi rst.
Press the Power switch on the Plasma Display to turn the
set on: Power-On.
Power Indicator: Green
Example: The screen below is displayed for a while after
the Plasma Display is turned on (setting condition
is an example).
Press the
button on the remote control to turn the Plasma Display off.
Power Indicator: Red (standby)
Press the button on the remote control to turn the Plasma Display on.
Power Indicator: Green
Turn the power to the Plasma Display off by pressing the switch on the
unit, when the Plasma Display is on or in standby mode.
Note:
During operation of the power management function, the power indicator turns
orange in the power off state.
When the Power is turned on for the fi rst time,
the Language selection screen is displayed.
From the second time on, language
selection can be done from the setup
menu. (see page 13)
Select the desired language using the or
button and press the ACTION (
) button.
Note:
Set with the remote control. Buttons on the
main unit are unavailable for this setting.
From the second time on, the below
screen is displayed for a while (setting
condition is an example).
Remote Control
Sensor
Power Indicator
Right side surface
Main Power
On / Off Switch