Filter
Top Products
14
Cable Connection
This TV is capable of displaying 1080i and 480p DTV signals when connected to a DTV Tuner Set-Top-Box (STB). This
TV also utilizes a progressive scan doubler, which de-interlaces the NTSC signal and progressively scans the image. This
allows you to sit close to the TV and not see the thin black horizontal lines (venetian blind effect) associated with interlaced
TV pictures.
• To view DTV programs, connect the STB to the component video input terminals (Y, P
B
, P
R
) of the TV. Component color
inputs provide luminance and color separation.
• Select the output of the STB to either 1080i or 480p.
• A DTV signal must be available in your area.
• Use a Panasonic DTV-STB (Digital TV-Set-Top Box) or DVD Player.
Digital TV - Set-Top Box (DTV-STB) or DVD Connection
DIGITAL TV OUTPUT
MAIN
VIDEO
AUDIO OUTPUT
PB
PR
Y
R
L
PROG OUT
COMPONENT VIDEO INPUT
S VIDEO
VIDEO
Y
P
B
L
R
P
R
12
12
INPUT
VIDEO
TO AUDIO
AMP
CableCARD allows you to tune digital and high definition cable channels through the cable antenna. Consult your cable
company on the availability of CableCARD.
CableCARD Connection
Notes:
• If you experience keyboard or remote control function hang-up when using CableCARD, unplug the TV and plug it back
on and try the controls again. If this condition still exists, please call Panasonic Customer Call Center for further instructions.
• Do not insert a PCMCIA card into CABLE CARD slot.
Back of the TV
BAANTENNA
SERVCE ONLY
DIGITAL AUDIO
OUT
CABLE CARD
Cable In
INSERT THIS END
POD MODULE
Back of the TV
Upper side of the card
Set Top Box
DVD player
Component Video cable
Audio cable
Procedure
1. Connect the cable antenna to ANTENNA (A).
2. Turn the TV on (see page 19).
3. Set the input mode to TV (see page 20).
4. Insert the CableCARD (as it’s upper side facing to your side) into CABLE CARD slot on the back of the TV.
Follow the messages displayed on the screen.