Panasonic TH-42PV700AZ Flat Panel Television User Manual


 
Advanced
Menu
Item Adjustments / Con gurations (options)
Picture
Advanced
PC
Settings
W/B High R White balance of bright red area
and
repeatedly adjusted
W/B High B White balance of bright blue area
W/B Low R White balance of dark red area
W/B Low B White balance of dark blue area
Gamma (2.0 / 2.2 / 2.5 / S Curve)
Reset to
Default
Press the OK button to reset to the default settings
Setup
PC
Setup
Input
Resolution
Switches to a wide view
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,366 × 768 pixels)
Options change depending on signals
Clock Set to the minimum level if noise occurs
H-pos
Adjusts horizontal position
V-pos
Adjusts vertical position
Clock Phase
Eliminates icker and distortion
Adjust after Clock adjustment
Set to the minimum level if noise occurs
Sync
Chooses another synchronous signal if the image is distorted (H & V / On G)
H & V : by the horizontal and vertical signals from your PC
On G : by the green signal from your PC (if available)
Reset to
Default
Press the OK button to reset to the default settings
Input Selection
AV1
AV2
AV3
AV4
PC
HDMI1
HDMI2
HDMI3
TV
OPTION
SD CARD
EXIT
RETURN
INPUT
27
Displaying PC Screen on TV
Input Labels
To return to TV
Displaying PC Screen on TV
Select the external input
Select “PC”
2
The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected. To connect PC
(p. 32)
Corresponding signals (p. 38)
If “H-freq.” or “V-freq.” is shown in red,
the signals may not be supported.
PC menu setting (changed as desired)
To make settings “How to Use Menu Functions” to (p. 18)
Other items p. 20 and p. 21
1
access
select