Panasonic TH-50PZ850AZ Flat Panel Television User Manual


 
Advanced
Interval 5 seconds
Repeat On
Viewing Setup
Main Menu
Picture
Viewing Setup
Main Menu
VIERA Link
Picture
Sound
Setup
Mode Music
Bass
Treble
Balance
Headphone Volume
Surround Off
Volume Correction
SPDIF Selection Auto
Sound Menu 1/2
Speaker Distance to Wall
Over 30cm
16
16
12
39
(Photos and Movies)
Viewing from SD Card
(Photos and Movies)
R
Start Slide show (operate in step )
Slide show settings (operate in step )
Slide show (Photo View)
Select the photo for the first view Start Slide show
Display the
menu
Select “Viewing Setup” Select the items and set
access
“Picture Menu” p. 26
Menu Item Adjustments / Configurations (alternatives)
Viewing
Setup
Interval Select slide show interval (5 / 10 / 15 / 30 / 60 / 90 / 120 seconds)
Repeat Slide show repeat (Off / On)
set
select
To pause
To return to Single view
G
select
You can enjoy the multi-channel sound via an ampli er connected to DIGITAL AUDIO OUT terminal.
To con rm or change the current sound status (while viewing movies)
Audio output settings (operate in step )
Audio Settings (Movie View)
Display the
menu
Select “Sound” Select “SPDIF Selection” and set
access
Other items p. 26 and p. 27
select
set
select
During the operation, no signals are output from any of the AV terminals. But the sound in Movie View can be
output from AUDIO OUT and DIGITAL AUDIO OUT terminals.
“Date” shows the date on which the recording was made by the digital camera or digital video camera. The le
without record of the date is shown “**/**/****”.
SD
Card
For details on SD Cards p. 47
To remove To insert
Label surface
Push until a
click is heard
Press the centre of the card
Blue LED
Note
Slide show is done within the same group if started from the view of the group.
Menu Item Adjustments / Configurations (alternatives)
Sound
SPDIF
Selection
SPDIF : A standard audio transfer le format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT terminal
(Auto / PCM)
Auto: Dolby Digital is output as Dolby Digital Bitstream. MPEG is output as PCM.
PCM
: Digital output signal is xed to PCM.
Note
Blue LED lights while SD Card is
inserted if set “SD Card LED” to
“On” in Setup Menu (p. 27).
Display the Option menu Change the sound (if the movie has multiple audio signals)
Audio Selection Stereo
Option Menu
OPTION
(Current sound status)
It may take several seconds to change
the sound.
change