Filter
Top Products
13
Power ON / OFF
When the POWER is turned on for the fi rst
time, the LANGUAGE selection screen is
displayed.
From the second time on, language selection
can be done from the setup menu. (see
page 18)
Select the desired language using the or
button and press the ACTION ( ) button.
From the second time on, the screen
shown below is displayed for a while
(setting condition is an example).
English (UK)
Deutsch
Français
Italiano
Español
ENGLISH (US)
Русский
OSD Language
SetSelect
PC
FULL
Connecting the plug to the Wall Outlet
Press the Power switch on the Plasma Display to turn the set
on: Power-On.
Power Indicator: Green
Example: The screen below is displayed for a while after the
Plasma Display is turned on. (setting condition is an
example.)
Connecting the AC cord plug to the Plasma Display.
Fix the AC cord plug securely to the Plasma Display
with the clamper. (see page 9)
TH-42PWD8
INPUTMENU ENTER/+/VOL
-
/
TH-42PWD8
Power Indicator
Remote Control
Sensor
Press the button on the remote control to turn the Plasma Display off.
Power Indicator: Red (standby)
Press the button on the remote control to turn the Plasma Display on.
Power Indicator: Green
Turn the power to the Plasma Display off by pressing the
switch on the unit,
when the Plasma Display is on or in standby mode.
Note:
During operation of the power management function, the power indicator turns
orange in the power off state.