Filter
Top Products
40
Press or button to switch between
modes.
Off PC INPUT1 INPUT2
INPUT3
Locks the input switch operation.
Notes:
• Only the adjusted signal is displayed.
(see page 18).
• Signal can be displayed when the
Terminal board is installed.
• Input switch can be used when this is
set to “Off”.
• In two screen display mode, if anything
other than “Off” is set, the value will be
fi xed as the value input in the single
screen display mode.
Press or button to switch between modes.
On Off
On
Displays all the following on screen.
• Power on display
• Input signal switch display
• No signal display
• Mute and the remaining time of off-timer after was
pressed.
Off
Hides all the items above from view.
Press or button to switch between modes.
Off PC INPUT1 INPUT2 INPUT3
Adjusts the input signal when TV is turned on.
Notes:
• Only the adjusted signal is displayed.
(see page 18).
• Signal can be displayed when the Terminal board is
installed.
• This menu is available only when “INPUT lock” is “Off”.
Press
button to adjust the volume when TV is turned
on.
Off On
Off
Sets normal volume.
On
Sets your preferred volume.
Notes:
• When “Maximum VOL level” is “On”, the volume can only
be adjusted between 0 and your maximum range.
• You can hear the changed volume regardless of your
volume setting before opening the options menu if you
adjust the volume when “Initial VOL level” is “On” and
cursor is on the menu.
Press
button to adjust the maximum volume.
Off On
Off
Sets auto maximum volume.
On
Sets your preferred maximum volume.
Notes:
• If the “Maximum VOL level” is set lower than the “Initial
VOL level”, the “Initial VOL level” automatically becomes
the same as the “Maximum VOL level”.
• The volume display can go up to 63 regardless of the
settings.
• You can hear the changed volume regardless of your
volume setting before opening the options menu if you
adjust the volume when “Maximum VOL level” is “On” and
cursor is on the menu.
Press or button to switch between
modes.
Off On
Off
Nullify all the settings adjusted.
On
Sets the color temperature for TV
studio.
Note:
Valid only when the low is set as color
temperature on screen adjustment.
Options Adjustments
1/2
Options
Off-timer function
INPUT lock
Studio W/B
Advanced PIP
Display size
Initial VOL level
Maximum VOL level
Initial INPUT
Onscreen display
Off
Off
Off
Off
Enable
On
Off
0
Off
Off
0