Filter
Top Products
34
Select Signal from the “Setup” menu during RGB or PC input signal mode.
Press to adjust.
Sync
H & V
Sync
on VIDEO
Sync
on G
Setting RGB sync signal:
Confirm that the input is set to RGB input (this setting is valid only for RGB input).
H & V:
The H and V sync signals are input from the HD/VD connector.
on G: Uses a synchronized signal on the Video G signal, which is input
from the G connector.
on VIDEO: Compatible with the scart plug (Europe)
The composite video signal input from the VIDEO input terminal is
used by dividing the sync signals.
Setting PC sync signal:
Confirm that the input is set to PC input (this setting is valid only for PC input).
H & V: The H and V sync signals are input from the HD/VD connector.
on G: Uses a synchronized signal on the Video G signal, which is input from
the G connector.
Displays the H (Horizontal)/V (Vertical) frequencies.
This display is valid only for RGB input and PC input.
Display range:
Horizontal 15.6 - 110 kHz
Vertical 48 - 120 Hz
H-Freq. (kHz)/V-Freq. (Hz)
H
-
Freq. kHz
V
-
Freq. Hz
31.5
60.0
Setup for input signals
Sync
Signal
[
RGB
]
Sync
H
-
Freq. kHz
V
-
Freq. Hz
H & V
31.5
60.0
Signal
[
PC
]
Sync
H
-
Freq. kHz
V
-
Freq. Hz
H & V
31.5
60.0
Press to exit from adjust mode.
R
MULTI DISPLAY Setup
Set up TIMER
Setup
Signal
Screensaver
Component/RGB-in select
RGB
OSD Language
English
(
UK
)
Press
(ACTION) button
Sync
H & V
Sync
on G