Panasonic TH-42PX60U Flat Panel Television User Manual


 
23
Advanced
Control with HDMI “HDAVI Control
TM
Menu
Home theater
Picture
Audio
Lock
Setup
Memory card
Timer
Menu
TV speakers
Picture
Audio
Lock
Setup
Memory card
Timer
At the start of DIGA, Player theater or RAM theater playback, the TV’s input automatically switches to the input
corresponding to the playback equipment.
For RAM theater, the speakers automatically switch to theater.
If using DIGA operation, the TV’s input automatically switches to DIGA and the DIGA menu is displayed.
You can control the theater speaker with TV’s remote control.
“Home theater” with speaker icon appears when a Panasonic “Control with HDMI” home theater system is
connected via the HDMI input (1 or 2).
Pressing the OK button toggles between TV and home theater volume control.
“Ctrl with HDMI” must be set to “On”.
Limited to newer Panasonic Home Theater, RAM theater and DIGA/DVD models with “Control with HDMI”.
Display menu
Select “Home theater” or “TV speakers”
Ŷ
Home theater:
Adjustment for Panasonic Amplifier, Panasonic Player theater, Panasonic RAM theater
When selecting “Home theater”, the sound of TV speakers is mute.
When “Home theater” is selected, the home theater volume control can be raised or lowered using the TV remote
volume button. The TV will display “Home Theater + / -” on screen.
If home theater/RAM theater/Player theater is currently off, selecting the “Home theater” option will automatically
turn the equipment on. See “Power on link” below.
If home theater/Player theater/RAM theater power is turned Off, speakers automatically switch to the TV.
Volume up / down
Mute
Ŷ
TV speakers:
The TV speakers are active.
change
Note
Before using HDMI control functions, the connected equipment (DIGA, RAM theater, Player theater, AV amp) must
also be set. For details, see the operation manual for each equipment.
For equipment connection details, see p. 24.
When “Set” is selected, this allows for the TV to automatically turn on and switch to the appropriate HDMI input
whenever a “Control with HDMI” compatible DVD player/recorder is initially turned on and Play mode is selected.
When “Set” is selected, this allows for the TV to turn off and also turn off the connected home theater/
RAM theater/player theater and/or DIGA-DVD player.
If the “ONE TOUCH PLAY” key is pressed on the AV amp or Player theater remote control, the following sequence of operations
is performed automatically.
Home theater/Player theater power switches On, and playback begins.
TV power switches On, and the playback screen is displayed.
Audio is muted on the TV and switches to theater.
Caution
“Control with HDMI” function does not work in countries other than the USA and Canada.
The TV remains on even if the “Control with HDMI” compatible equipment is turned off.