Filter
Top Products
Tuning and Editing Channels
39
Update Digital TV channel automatically [Update Channel List] (Digital TV)
You can add new channels, delete removed channels, update channel name and position automatically to the channel
list.
CH 6 69
Digital TV Update Channel List
Scan
This will take about 3 minutes.
RF Ch Channel Name Type Quality
●
The channel list is updated while keeping your settings in [Favourites Edit],
[Channel List], [Child Lock], etc.
●
Depending on the signal condition, the update may not work properly.
Check Digital TV signal [Signal Condition] (Digital TV)
Selects a channel and checks the Digital TV signal condition.
A good Signal Strength is not an indication of suitable signal for Digital TV reception.
Use the Signal Quality indicator as follows.
●
Green bar: Good
●
Yellow bar: Poor
●
Red bar: Bad (Check the aerial)
●
To change the channel
Example:
101 DZFinfokanal
0 2 4 6 8 10
Wenvoe
[CH32] 562.00 MHz
Digital TV Signal Condition
Signal Quality
Channel Name
Signal Strength
Network Name
RF Parameter
These bars show the maximum signal value of the selected
channel.
Auto Tuning using the buttons on the TV
For Auto Tuning, using the buttons on the TV (p. 11)
1 Press the F button repeatedly until [Auto Tuning] appears
●
To return to TV
●
Control panel OSD appears
when pressing the control
panel button.
2 Access [Auto Tuning]
3 Start [Auto Tuning]
th-l32_42_47e5z.indb 39th-l32_42_47e5z.indb 39 3/20/2012 11:48:38 AM3/20/2012 11:48:38 AM