Filter
Top Products
Accessories / Options
Identifying Controls
Quick Start
Guide
9
Identifying Controls
TV
PC terminal
AV4 terminals
Headphone
jack
HDMI3
terminal
SD card slot
Function Select
Volume / Contrast / Brightness /
Colour / Sharpness / Tint (NTSC mode) /
Bass / Treble / Balance / “Digital TV Auto
Tuning” or “Analogue TV Auto Tuning”
(p. 24 - 25)
●
Change the channel up/down. When
a function is displayed, press up/down
to adjust the setting of the selected
function. When in standby mode,
switches TV on.
Change the input mode
Preventing the TV from falling over
This TV could fall over if it's pushed, pulled or knocked down.
We therefore recommend the TV is secured to the base as illustrated.
This measure is designed to reduce the risk of injury from a falling TV. However, it cannot guarantee protection in
all cases.
Fall-prevention parts
●
Securing to a base
Fix pedestal and base together with band.
Screw
Band
Wood screw
Clamp
This image is for illustrative purposes only.
Band Clamp Screw Wood screw
TKLA4301● TKL3DA0101●
C.A.T.S. (Contrast Automatic Tracking System) sensor
Senses brightness to adjust picture quality when “Eco Mode”
in the Picture Menu is set to “On” (p. 24)
●
Mains power On / Off
Switch On to turn on the TV or turn the TV
to standby mode by the remote control
●
Remote control signal receiver
Do not place any objects between the TV remote control
signal receiver and remote control.
●
Power LED
Standby: red
On: green
When using the remote control,
indicates the TV has received a command.
●
●