Panasonic TQBC0627-2 Flat Panel Television User Manual


 
34
3
Press to adjust Pos./Size.
Press to exit from adjust mode.
Adjusting Position and Size
Adjusting screen
1 Press to display the Setup menu.
2 Press to select H-Pos/H-Size/V-
Pos/V-Size/Clock Phase.
1 2 3
4 5 6
7 8 9
0
C
SET UP
TV/AV
Normal
Setup
Normalise
H-Pos
H-Size
V-Pos
V-Size
Clock Phase
Sync
H & V
H-Size
V-Size
H-Pos
V-Pos
Flickering and distortion can be eliminated by using the Position Left
or Right
button
to carry out adjustment.
Clock Phase
When the Position Left
button is pressed.
When the Position Left
button is pressed
When the Position Right
button is pressed
When the Position Right
button is pressed.
While the Setup display is active, if either the N button on the remote control is pressed at any time or the
or
button is pressed while the yellow cursor is at the Normalise position, then all adjustment values are returned to the
factory settings.
Sync
H & V : To synchronize by the horizontal and vertical signals from your PC.
on G : To synchronize by the green signal form your PC (if available).
1 Press TV/AV button.
2 Press Yellow (AV3) button to
access PC mode.
N
Helpful Hint ( /
Normalise
Normalisation)
Picture Adjustments (PC mode)
When the Position Left
button is pressed.
When the Position Left
button is pressed.
When the Position Right
button is pressed.
When the Position Right
button is pressed.