Panasonic TU-PTA100E Satellite TV System User Manual


 
9
Press the ASPECT button to move through
the six aspect options: Panasonic Auto, 4:3,
Zoom, S-Zoom, 16:9 and Just
ASPECT CONTROLS
The receiver will allow you to enjoy viewing the picture at its maximum size, including
widescreen ‘cinema format’ pictures.
4:3
Zoom
4:3 will display a 4:3 picture at its standard 4:3
size and can be selected if you wish to view in
this format.
Note:
After setting this mode, turn the power off and
back on again to activate the Just mode setting.
Panasonic Auto
Some broadcasts are transmitted together with a
wide screen identification signal (WSS). If the
receiver receives this signal then it will
automatically switch to wide screen 16:9 mode,
maximum display.
The automatic widescreen switching depends
upon reception conditions and the strength of the
signal. If the signal is poor and therefore the
WSS is weak then it is possible that the picture
may not expand to full size and that the receiver
will display black areas around the edges.
If the original source signal was a standard 4:3
aspect ratio then you might prefer to view it in its
original size; the red and green keys that appear
will allow you to choose between viewing at
standard 4:3 size or expanded in Just mode.
Zoom mode magnifies the central section of the
picture.
The picture can be moved and enlarged vertically
using the colored keys. The former adjustment is
useful for viewing any sub-titles which may
appear outside the picture.
Panasonic Auto
4:3
Zoom