Panasonic TX-26LX500A Flat Panel Television User Manual


 
29
Card operations
OK
Press to skip the previous view.
Press to display the thumbnail.
Press to rotate the view.
Each press rotates the view ninety degrees.
Press to skip the next view.
Photo view
The still images recorded by the digital camera will be displayed.
This function supports both SD cards and PC cards.
Press the SD button.
Move to choose Photo view.
Access Photo view.
After for a while, the thumbnail screen is displayed.
Select the file.
Press the OK button to view.
Notes:
Picture menu or Card setup menu adjustment is possible by pressing
the MENU button during Photo view.
During single view and Slide show, the Aspect ratio can be changed
by pressing the ASPECT button.
During single view
When the operation guide is not displayed, press the button to display it.
During the operation guide is displayed
Press the Red button to zoom the view.
Press again to cancel the zoom.
Card setup menu
Press the MENU button during Photo view.
Move to choose Card setup menu.
Access Card setup menu.
Move and adjust options or access Slide show.
MENU
OK
OK
OK
Red
Select
Select
SD : Return
Exit
View
PHOTO
VIEW MODE
Filename : 800-0003
Date : 06/12/2003
Pixel : 2048x1536
00001/00028
SD card
MPEG4 view
Photo view
Setup
Memory left
Inserted card displayed
Slide show
Interval
Card setup menu
Access
5sec
Repeat
Off
Card
SD
Main menu
Picture menu
Card setup menu
SD : Return
Exit
List
Select
Zoom
16:9 14:9Auto Just4:3
14:9 : Displays a 14:9 picture at its standard 14:9 size without
any stretching.
AUTO :Selects optimum ASPECT (16:9, 14:9 or 4:3) from the
resolution (aspect ratio) of Photo size.
Slide show
Select the settings of Interval and Repeat
before accessing Slide show.
Interval (5sec, 10sec, 15sec, 30sec,
60sec, 90sec or 120sec)
Select the length of time that a slide is
being displayed on screen.
Repeat (On or Off)
Select the Repeat On or Off.
On : Repeat the Slide show.
Off :Return to the thumbnail screen after playing the Slide
show one time.
Card (SD or PC)
Select either SD or PC when both cards are inserted in the slots.
Not selected when one card is inserted.