Filter
Top Products
28
Aspect Controls
16:9 14:9
4:3
ZOOM2
JUST
ZOOM1
AUTO
ZOOM3
1 2 3
4 5 6
7 8 9
0
F.P.
INDEX HOLD
STILL
CH SEARCH
TV/TEXT
100Hz/
PROGRE
SURROUND
MULTI
PIP
ASPECT
The on screen selector keys (corresponding to the four coloured buttons on the remote control) appear for some Aspect functions and disappear
after a few seconds. If you would like to select an operation when the keys are not shown, press
ASPECT
once more and the keys will reappear.
Press
to select the different Aspect options.
Notes:
• Simply press
ASPECT
to display mode information in the top left of the screen.
•
16:9 picture has been used to illustrate all of the aspect modes described in this section.
By pressing the Normal “N” Button on the Remote Control while the Aspect menu is displayed, the selected menu will be changed
to the Normal Mode.
Normalization will not occur if the menu is not displayed when the “N” Button is pressed.
The Normal mode is the factory preset condition. Returning to this original condition is called “Normalization”.
Helpful Hint (
N
Normalization)
ASPECT
Notes:
• ASPECT operations cannot be made during progressive (Y, P
B, PR) or 1080i signal input.
• The Red and Green buttons let you change the mode during the mode displays.
ZOOM2
ZOOM1
AUTO
ExplanationPictureMode
4 : 3
ZOOM1
16 : 9
16:9 Signal
ZOOM2,
ZOOM3
16:9 Signal 4:3 Signal
The AUTO position can be set to 16 : 9. When a
wide screen signal is detected at the Video
terminal the TV will select the 16:9 aspect ratio.
This option will display a standard 4:3 picture
without any stretching or compression. There
will be vertical gray lines down either side of the
picture.
The picture becomes larger and larger when
you change the mode ZOOM2 and ZOOM3.
The 16:9 option will display the picture at its
maximum size. Signals in the 4:3 format will be
stretched to fit the picture.
This option allows you to magnify the picture.
14 : 9
JUST
The 14:9 option will display a 4:3 signal in
simulated wide screen. The picture is slightly
stretched. It is also slightly cropped top and
bottom.
JUST gives you a best fit option when showing
4:3 on wide screen. The centre of the picture is
not affected but there is some stretching at the
edges.
4:3 Signal