Panasonic TX-86PW100A CRT Television User Manual


 
36
Connecting Equipment to the TV
Front Panel Connections
Connecting to the RGB Input Terminals
Behind the front panel door is the headphone socket, the AV3 input and the RGB input.
Personal computers (PC) with 640 x 480 (31.5kHz / 60Hz) or 640 x 400 (31.5kHz / 70Hz)
resolution can be connected to this television.
Note: the display will prompt you to set the resolution to 640 x 480.
The computer must be set to High Colour (16 bit).
In some cases other PCs may not work with this TV set.
There is no audio signal in RGB mode.
Connect the sound cables to the AV3 Audio Input terminals.
Some computers such as PC-98 and Macintosh require a commercially sold adapter between the
RGB cable (D-Sub 15P) and the computer.
There is no need for an adapter when using computers with a DOS/V compatible D-Sub 15P
terminal.
With some computers it may be necessary to press Function F4 twice to give a display on the
television.
There are no computer connection cables included with this television.
Signal names for D-Sub 15P Connector
Pin Signal Pin Signal Pin Signal
No. Name No. Name No. Name
1 R 6 GND 11 GND
2 G 7 GND 12 NC
3 B 8 GND 13 HD/SYNC
4 GND 9 NC 14 VD
Pin layout for RGB 5 GND 10 GND 15 NC
Terminal
GND is Ground NC is Not connected
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11
L
/
M
O
N
O
R
A
U
D
I
O
R
G
B
(
3
1
.
5
k
H
z
)
S
-
V
I
D
E
O
V
I
D
E
O
A
V
3
I
N
M
a
i
n
S
u
b
D-SUB 15P
RGB
PC Cable
Conversion adaptor
(If necessary)