Filter
Top Products
Instruction of the installation
Assembling the mobile stand
Slide the shelf, with the supports in the slots, down to the required
height. Choose the locations of stopper holes to match the required
height. Then fix the shelf using the four
screws and spring washers.
2
Front
Insert the holder into the supports, and fix it with the four screws.
3
When installing the stand,
provisionally fasten all
bolts and screws first,
and then fasten them to
complete the assembly.
Bolt (M8)
Support
Choose the locations of
the stopper holes to
match the required height.
1) height of 500 mm
2) height of 350 mm
1
2
Be sure to assemble on a
stable horizontal surface.
Assembly screw (M6-16)
and spring washer x 4 each
Assembly screw(M5-15)
3-3
Insert the supprots into the slots on the upper side of stand base, and
then fix them from below using the four
bolts.
1