Filter
Top Products
19
H-POS
H-SIZE
V-POS
V-SIZE
CLOCK PHASE
(RGB/PC in Mode)
When the Position Right
“ ”
button is pressed
When the Position Right
“ ”
button is pressed
When the Position Right
“ ”
button is pressed
When the Position Right
“ ”
button is pressed
When the Position Left
“ ”
button is pressed
When the Position Left
“ ”
button is pressed
When the Position Left
“ ”
button is pressed
When the Position Left
“ ”
button is pressed
Helpful Hint ( /
NORMALIZE
Normalization)
While the PICTURE POS./SIZE display is active, if either the N button on the remote control is pressed at any time or the
(ACTION button) is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.
N
Adjusting PICTURE POSITION/SIZE
Adjusting screen
Press to display the PICTURE POS./
SIZE menu.
Press to adjust POS./SIZE.
Press to exit from adjust mode.
Press to select H-POS/H-SIZE/V-POS/
V-SIZE/CLOCK PHASE.
During “VIDEO (S VIDEO)” and
“COMPONENT” input signal.
During “RGB” and “DVI” input
signal.
1
3
2
Notes:
(1) Adjustment details are memorized separately
for different input signal formats (Adjustments
for component signals are memorized for 525
(480) / 60i · 60p, 625 (575) / 50i · 50p, 1125
(1080) / 60i · 50i · 24p · 24sF, 1250 (1080) /
50i, 750 (720) / 60p · 50p each, and RGB/DVI
signals are memorized for each frequency.)
(2) If a “Cue” or “Rew” signal from a VCR or DVD
player is received, the picture position will
shift up or down. This picture position
movement cannot be controlled by the
PICTURE POS./SIZE function.
Flickering and distortion can be eliminated by using the Position Left
“ ”
or Right
“ ”
button to
carry out adjustment.
PLASMA DISPLAY
N R
INPUT
SURROUND
VOL
PICTURE
SOUND
SET UP
ASPECT
PICTURE
POS. /SIZE
OFF TIMER
PC
MULTI
PIP
SWAP SELECT MOVE
ZOOM
PICTURE
POS. /SIZE
NORMAL
PICTURE POS./SIZE
NORMALIZE
H-POS
H-SIZE
V-POS
V-SIZE
NORMAL
PICTURE POS./SIZE
NORMALIZE
H-POS
H-SIZE
V-POS
V-SIZE
CLOCK PHASE
R