Filter
Top Products
22
■ Mounting in the Rack
1. Remove the four rubber feet by removing the four
screws on the bottom of the video multiplexer.
2. Place the rack mounting brackets on both sides of the
video multiplexer and tighten with the six supplied
screws (M3 x10).
3. Install the video multiplexer with the rack mounting
brackets in the rack by using four screws (not includ-
ed).
Cautions:
• Do not block the ventilation opening or slots on the
cover to prevent the appliance from overheating.
Always keep the temperature in the rack within
50°C (122°F).
• Secure the rear of the appliance to the rack by
using additional mounting brackets (procured local-
ly) if the rack is subject to vibrations.
Remove 4 rubber feet
Six screws (Supplied)
Fix the rack mounting brackets
INSTALLATIONS