Filter
Top Products
23
Setting up the Rack
Install the recorder into an EIA standard compliant rack.
Note:
• Installation in a rack requires four M5 x 12 screws.
1 Remove the 5 rubber feet from the underside of the
recorder.
Use a screwdriver to remove the screws holding the rubber
feet.
2 Attach the handle for rack mounting bracket to the rack
mounting brackets.
Use the four handle fixing screws for rack mounting bracket
and washers to secure them.
3 Attach the rack mounting bracket to both sides of the
recorder.
Secure them using the six rack mounting bracket fixing
screws.
4 Install the recorder in the rack.
Secure using the rack mounting screws.
Rack Mounting
EIA standard compliant
product
(locally procured)
: an EIA-standard 19"rack, depth
550 mm or more
Remove rubber feet
Handle for rack mounting bracket
Rack mounting bracket
Handle fixing screws for
rack mounting bracket
Washer
Washer
Rack mounting brackets (provided)
Handle for rack
mounting bracket
Handle for rack
mounting bracket
R
ac
k
mount
i
ng
b
rac
k
et
fi
x
i
ng screws
(
prov
id
e
d)
Important:
• Ensure that the temperature inside the rack does not exceed
45 ºC {113 ºF}.
• During installation, we recommend installing a fan to keep the
temperature in the rack below 30 ºC {86 ºF}.
• When installing the recorder in the rack, leave a space of
1 unit (44 mm {1.73"}) above and below each unit.
• Leave space between racks and ensure proper ventilation
around the racks.
Rack mounting screws (M5 x 12, locally procured)
chap3.fm 23 ページ ２００８年４月８日 火曜日 午後５時２２分