Filter
Top Products
15 Troubleshooting
The ultrasonics will begin immediately to remove the lead from the slide.
All lead should be removed within 10 seconds. If your cleaner passes
this test, its ultrasonic cavitation is acceptable.
Service
With normal use, your Ultrasonic Cleaner should not require servicing.
However, if it fails to operate satisfactorily, first try to diagnose the
problem by following the suggestions in the Troubleshooting Guide.
If you find that your cleaner needs repair, carefully pack and return it to
your local Service Center. If under warranty, remember to include proof
of purchase. Your cleaner will be returned by ground service unless you
specify otherwise.
Authorized Service Centers
Name Address Tel/Fax Number
Alpha Omega
Electronics Corp.
2821 National Drive
Garland, TX 75041
Tel: 972-271-5571
Tel: 1-800-540-4967
FAX: 972-840-3668
Crystal Electronic Inc. 140 Centre Street
Aurora, Ontario
Canada L4G 1K1
Tel: 905-841-5762
FAX: 905-841-9688
Paragon Electronics 6861 SW 196
th
Avenue
Pembroke Pines, FL 33332
Tel: 954-434-8191
Fax: 954-434-8385
Master Sonics
Repair Center
77 Whiting Street
Plainville, CT 06062
Tel: 800-737-2198
860-410-1700
Fax: 860-410-1704
NOTE:
To ensure consistency from test to test, be sure to repeat
test conditions - use the same solution concentration, liquid level,
temperature, type of pencil, length of degassing, etc.