Filter
Top Products
ISSUED: 2-19-98 SHEET #: 073-9003-1 08-26-04
For customer service call 1-800-729-0307 or 708-865-8870.
Visit the Peerless Web Site at www.peerlessindustries.com
2 of 5
P
R
From the top thread flush mount tube (R)
through threaded fitting in ceiling plate (P).
IMPORTANT: If you will install an extension
column DO NOT INSTALL THE FLUSH
MOUNT TUBE.
For Wood Joist Finished Ceiling, Ex-
posed Wood Joists, or Wood Beam
Ceiling. (See 3 for concrete ceilings). Drill
four 5/32" (4 mm) dia. holes to a minimum
depth of 2.5" (64 mm). Attach ceiling plate
(P) with four #14 x 2.5" (6 mm x 65 mm)
wood screws (U). Tighten wood screws so
ceiling plate is firmly attached. DO NOT
TIGHTEN WITH EXCESSIVE FORCE!
Overtightening can cause stress damage to
wood screws greatly reducing their holding
power! Tighten to 80 in • lb (9 N.M.) maxi-
mum torque.
Snap end caps (Q) into place.
P
Q
U
∅ 5/32" (4 mm)
Q
• Tighten wood screws so that ceiling plate is firmly
attached, but do not overtighten. Overtightening can
damage the screws, greatly reducing their holding
power.
• Never tighten in excess of 80 in • lb (9 N.M.).
• Make sure that mounting screws are anchored into the
center of the joists. The use of an "edge to edge" stud
finder is highly recommended.
WARNING