Filter
Top Products
6 of 36
ISSUED: 11-19-07 SHEET #: 202-9248-6 11-04-09
Attaching Mounting Plate to Screen
For VESA
®
50, 75 or 100 Mounting Pattern:
Choose hole pattern as shown in detail 1 for VESA 50,
75 or 100 mounting pattern. Attach mounting plate (B)
to back of screen using four M4 x 10 mm screws (F) as
shown.
NOTE: Be certain bottom flanges of mounting plate (B)
face toward bottom of screen.
*NOTE: If hole pattern is in a pocket, attach mounting
plate (B) to back of screen using four M4 x 20 mm
screws (G) and four retaining spacers (H) as indicated.
Skip to step 3.
2
• If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to screen or product may fail.
WARNING
Mounting Patterns
VESA
®
75 VESA
®
100VESA
®
50
DETAIL 1
H
*For screens with a hole
pattern in a pocket, spacers (H)
go between mounting
plate (B) and screen when
using screw (G).
NOTE: For VESA
®
200 x 100, 120 x 180 or 200 x 200 hole patterns, see following page.
B
F or G
BOTTOM
FLANGES
SCREEN