Filter
Top Products
8 of 34
ISSUED: 11-09-07 SHEET #: 202-9251-4 04-12-10
Mounting and Removing Flat Panel Screen
Hook adapter brackets (BB) onto wall plate (AA).
Then slowly swing screen in as shown. Turn safety
screws, using allen wrench (EE), clockwise at least six
times to prevent screen from being removed as shown
in detail 1 of fi gure 3.1.
Screen can be adjusted horizontally if desired as
shown in fi gure 3.2.
NOTE: To lock the screen down, tighten security
screws to wall plate as shown in detail 1.
To remove screen from mount, loosen safety/security
screws, swing screen away from mount, and lift
screen off of mount.
3
• Always use an assistant or mechanical lifting equipment to safely lift and position the fl at panel screen.
WARNING
AA
BB
DETAIL 1
BB
AA
• Do not tighten screws with excessive force. Overtight-
ening can cause damage to mount. Tighten screws to
40 in. • lb (4.5 N.M.) maximum torque.
CAUTION
fi g. 3.1
fi g. 3.2
SECURITY
SCREWS
© 2009, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Peerless Industries, Inc.
3215 W. North Ave.
Melrose Park, IL 60160
www.peerlessmounts.com