Filter
Top Products
9 of 27
ISSUED: 05-17-07 SHEET #: 202-9208-3 5-7-08
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-865-2112 or 708-865-8870.
To remove screen from mount, slowly swing
bottom of screen away from wall and slightly
push top of screen toward wall to disengage
hooks on vertical brackets (B) from wall plate (A).
Lift screen off of wall plate as shown in figure 4.1.
fig. 3.2
Mounting Flat Panel Screen
To Mount Screen With No Tilt or 2° Tilt
Hook vertical brackets (B) onto wall plate (A)
using top hooks for no tilt and bottom hooks for 2°
tilt as shown in figure 3.3. Hooks of vertical
brackets must be engaged securely onto wall
plate as shown in detail 1, then slowly swing
screen toward wall as shown in figure 3.1.
Screen can be adjusted horizontally if desired as
shown in figure 3.4.
To Mount Screen With 5° or 10° Tilt
Remove wall support brackets and screws from
vertical brackets as shown in figure 3.2. Hook
vertical brackets (B) onto wall plate (A) using top
hooks for 5° tilt and bottom hooks for 10° tilt as
shown in figure 3.3. Hooks of vertical brackets
must be engaged securely onto wall plate as
shown in detail 1, then slowly swing screen
toward wall as shown in figure 3.1.
Screen can be adjusted horizontally if desired as
shown in figure 3.4.
4
Removing Flat Panel Screen
• Be careful not to pinch fingers when pushing screen
from the bottom.
CAUTION
DETAIL 1
fig. 3.1
© 2008, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
REMOVE
WALL SUPPORT
BRACKETS AND SCREWS
FOR 5° OR 10° TILT
fig. 4.1
• Always use an assistant or mechanical lifting equip-
ment to safely lift and position the plasma television.
WARNING
fig. 3.4
BA
A
B
B
A
B
10° TILT
5° TILT
2° TILT
FLAT
fig. 3.3
3