Filter
Top Products
6 of 7
ISSUED: 04-18-05 SHEET #: 201-9427-6 02-06-07
Attaching Hook Bracket to Flat Panel Screen
Thread M5 phillips screws (C) to hook bracket (B)
making the screws flush with bracket as shown in
figures 2.1 and 2.2.
• If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to screen or product may fail.
WARNING
F
*For screens with a hole
pattern in a pocket,
spacers (F) go between
hook bracket (B) and
screen.
D
FOR VESA 100 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach hook
bracket (B) to back of screen using four M4 x 10 mm
screws (D) as shown below.
D
2
3
FOR VESA
®
75 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach hook
bracket (B) to back of screen using four M4 x 10 mm
screws (D) as shown below.
*Note: If hole pattern is in a pocket, attach hook
bracket (B) to back of screen using four M4 x 20 mm
screws (E) and four retaining spacers (F) as indicated
below.
B
C
C
B
fig. 2.1 fig. 2.2
B
B