7 of 7
ISSUED: 04-18-05 SHEET #: 201-9427-6 02-06-07
Hook screen onto wall plate (A) figure 4.1. Tighten
M5 x 12 mm screws (C), shown in figure 4.2 and
detail 1.
Note: For security models, tighten M5 x 12 mm
screws (C) using 4 mm allen wrench (I)
To remove screen from mount, loosen screws (C)
and lift screen off of mount.
Installing and Removing Flat Panel Screen
4
A
SCREEN
• Do not lift more weight than you can handle. Use
additional man power or mechanical lifting equipment
to safely handle placement of the screen.
• Failure to lock hook bracket with screws (C) can
cause screen to come off mount if hit accidentally.
• Do not tighten screws with excessive force.
Overtightening can cause damage to mount. Tighten
screws to 20 in. • lb (2.26 N.M.) maximum torque.
CAUTION
WARNING
DETAIL 1
fig. 4.2
fig. 4.1
A
C
B
B
A
C
© 2007, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.