Filter
Top Products
C1669M (4/05) 3
DX8000 Settings Export/Import Procedure
This section describes how to upgrade the DX8000 Series DVR software from Version 1.0.00.1088 to Version 1.1.00.1121.
The DX8000 Settings export/import procedure describes how to do the following:
• Export your current DX8000 configuration settings
• Use the DX8000 Recovery CD to upgrade from Version 1.0.00.1088 to Version 1.1.00.1121
• Import your current DX8000 configuration settings and configure the new version of DX8000 software
This procedure ensures that you will have a smooth transition to the next version of DX8000 software.
There are two phases to perform the DX8000 settings export/import procedure: export and import. The steps to perform the export and import
phases are summarized as follows:
• Export settings phase:
– Step 1: Recording DX8000 Network Settings
– Step 2: Exporting DVR Settings
– Step 3: Recording IP Security Settings
– Step 4: Running the DX8000 Recovery Procedure
• Import settings phase:
– Step 5: Entering Networking Settings
– Step 6: Importing the DX8000 DVR Settings
– Step 7: Configuring IP Security Settings
EXPORT PHASE
Step 1: Recording DX8000 Network Settings
To document the DX8000 network settings:
1. Click the Setup icon.
2. Click the Network icon.
3. Do the following:
a. Record the DX8000 IP address: ___________________________.
b. Record the subnet mask: ________________________________.
c. Record the default gateway address: ________________________.
d. Indicate if Obtain an IP Address Automatically is: Checked_____ Unchecked_____.