®
SWM Series Spectra
®
Compact Wall Mount
Installation/Operation Manual
C293M (11/98)
1. Installation and servicing should only be done by qualified service personnel
and conform to all local codes.
2. Installation shall be done in accordance with all local and national electrical
and mechanical codes utilizing only approved materials.
3. Use only installation methods and materials capable of supporting four times
the maximum specified load.
Please thoroughly familiarize yourself with the information in this
manual prior to installation and operation.
The SWM Series Spectra
®
Compact Wall Mount is designed to provide indoor and
outdoor wall mounting for Pelco’s pendant domes in the Spectra
®
and DF5 series.
The mount features cable feedthrough that conceals the electrical wiring to the
dome back box. A 1-1/2" NPT pipe thread is provided in the mount to attach the
pendant dome. Anti-seize compound is supplied to be applied to the pipe thread.
The sun shield used for the outdoor versions of the pendant dome back boxes is
readily accepted by the mount.
The mount can be attached to any vertical load-bearing surface or to an SWM-PA
Series pole adapter by means of a mounting cleat. A gasket is affixed to the base
to protect the interior from moisture.
The mount is constructed of aluminum and has either a light gray or black polyester
powder coat finish.
SWM-GY Compact wall mount with cable feedthrough for use with
Spectra
®
SD5 or DF5 Series pendant domes. Gray finish.
SWM-BK Same as SWM-GY, except black finish.
Pelco • 3500 Pelco Way, Clovis, CA 93612-5699 • USA • www.pelco.com
In North America and Canada: Tel (800) 289-9100 • FAX (800) 289-9150
International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120
2.0 DESCRIPTION
2.1 MODELS
1.0 WARNINGS