Filter
Top Products
Pelco Manual C293M (11/98) 3
MECHANICAL
Construction: Cast aluminum
Finish
SWM-GY: Gray polyester powder coat
SWM-BK: Black polyester powder coat
Mount Method: Mount is secured by a set screw to a mounting cleat that
is attached to a surface with two fasteners (not supplied).
A gasket is affixed to the base to protect the interior from
moisture. An adjustment plate is provided to allow the wall
mount to be shimmed when the mounting surface is not
plumb. The lower hole in the mounting cleat is elongated,
which allows for vertical alignment adjustment.
Dome Mounting: 1-1/2" NPT pipe thread in mount tip. Anti-seize
compound is supplied to be applied to the pipe threads.
Cable Entry: One cable feedthrough hole in the mounting cleat. Cable
feeds through the mount into the pendant dome.
Maximum Load: 10 lb (4.5 kg)
GENERAL
Environment: Indoor/outdoor
Dimensions: See Figure 2
Weight: Unit Shipping
1.1 lb (0.50 kg) 2.0 lb (0.91 kg)
(Design and product specifications subject to change without notice.)
4.0 SPECIFICATIONS
3.10
(
7.87
)
2.54
(
6.45)
6.25
(15.88)
4.15
(10.54)
NOTE: VALUES IN PARENTHESES ARE IN CENTIMETERS; ALL OTHERS ARE INCHES.
Figure 2. SWM Dimension Drawing