Pelco DX7008-480 DVR User Manual


 
Pelco Manual C682M-E (11/01) 15
MOTION DETECTION SETUP
Figure 10. Motion Detection Setup Menu
1 BEEP – Beeps when motion is detected.
2 SENSITIVITY – Adjusts the sensitivity of the detection areas.
3 CLEAR ALL BLOCK – Deletes all motion detection area blocks.
4 Motion Detection Area – To select a detection area move the pointer to the desired
area. Hold down the left mouse button and drag over the area. Release the left mouse
button to end selection. A maximum of 10 detection areas can be set per camera.
1
2
3
4
01192