Filter
Top Products
Pelco Manual C682M-E (11/01) 33
EMERGENCY AGENT SOFTWARE
Figure 24. Emergency Agent Window
Emergency Agent software alerts the remote site client of any triggered alarm at the surveil-
lance site. When an alarm is triggered a popup widow appears on the monitor of the remote
site client. The window displays a detailed list (date and time) of all images recorded during
the alarmed event.
To view the transmitted images use the playback buttons located at the bottom of the Emer-
gency Agent software window.
To install the Emergency Agent software:
1. Start Windows 98.
2. Close all programs, including any anti-virus programs.
3. Insert the Remote Users Software CD into the CD-ROM drive.
4. The Windows 98 Setup wizard starts. Follow the instructions that appear.
5. The DX7000 Series software installation program appears. Click on the Emergency
Agent software button and follow the instructions.
6. Restart the computer.
NOTE:
For the Emergency
Agent Software to operate
the DX7000 System at the
surveillance site must be
setup for remote alarm
operation. To setup the
DX7000 DVR for remote
alarm operation, refer to the
Schedule Setup
section of
the DX7000 Series Digital
Video Recorder Installation
and Operation Manual.
00950