Filter
Top Products
C1606M (6/04) 33
Initialize the New Drive
1. While the DX8000 starts, the built-in setup program will automatically detect the newly installed drive and
reconfigure the basic settings of the unit to make use of the increased storage capacity. No action by the user is
necessary during this step.
2. After the unit has detected and prepared the newly added drive, the Windows
®
operating system will automatically
reboot to complete the drive preparation process. No action by the user is necessary during this step.
3. After the system has been rebooted, the PDB Initialize screen appears. Before the new drive can be used to store
video data, it must be made compatible with the DX8000’s Pelco proprietary database (PDB) file structure. Follow
the steps below after the PDB Initialize screen appears to finalize storage setup:
a. Click the plus (+) sign next to the blue box—the one that reads, “Space on one or more hard disk drives has
not yet been allocated to the PDB database.” Refer to Figure 29.
Figure 29. Opening List of Drives
3a