Filter
Top Products
12 C1615M-B (1/06)
REPLACING A FAN
The fan baffle on the RK5000PS-5U has 10 fans. These fans can be replaced easily in case of failure. To replace a fan, follow these steps and
refer to Figures 9-12.
1. Unscrew the two thumbscrews on the back of the fan baffle.
2. Lower the back panel until the fans are exposed.
3. Unscrew the two screws that hold the fan in place.
4. Unplug the red 2-pin connector from the bus board.
5. Remove the failed fan and insert the new one.
6. Plug in the 2-pin connector.
7. Tighten the two screws to hold the fan in place.
WARNING:
Do not overtighten the two screws. Doing so can crack the plastic fan case.
8. Raise the back panel and tighten both thumbscrews.
Figure 9.
Fan Baffle Thumbscrews
Figure 10.
Fan Baffle Back Panel