Filter
Top Products
Fast Ethernet Media Converter – Installation Guide
2
Overview
This document contains instructions necessary for the installation and
operation of the Perle Fast Ethernet Standalone Media Converters
(S-100). These products convert a 100Base-TX cable connection
(copper) to a 100Base-X connection (fiber). The fiber connection can
be either single mode (SM) or multimode (MM) and can operate over
different wavelengths and distances, depending on the model
selected (see table below).
Model Connector Mode - Distance Wavelength
S-100-M2xx2 SC/ST/LC MM - 2 km/1.2 mi. 1310 nm
S-100-S2xx20 SC/ST/LC SM - 20 km/12.4 mi. 1310 nm
S-100-S2xx40 SC/ST/LC SM - 40 km/24.9 mi. 1310 nm
S-100-S2xx80 SC/ST/LC SM - 80 km/49.7 mi. 1550 nm
S-100-S2xx120 SC/ST/LC SM - 120 km/74.6 mi 1550 nm
S-100-S1SC20U SC SM - 20 km/12.4 mi. 1310/1550 nm
S-100-S1SC20D SC SM - 20 km/12.4 mi. 1550/1310 nm
S-100-S1SC40U SC SM - 40 km/24.9 mi. 1310/1550 nm
S-100-S1SC40D SC SM - 40 km/24.9 mi. 1550/1310 nm
Note: Please refer to Perle’s web site for the most up to date
Installation guides, models and specifications:
http://www.perle.com/