Filter
Top Products
B
A
C
K
U
P
TV
SATVCR
MENU
SHIFT
123
456
789
0
A/V
DVD
VOL
VOL
CH
CH
?
TV GUIDE INTERACTIVE
HELP
BOX OFFICE SERVICE
SELECT/OK
FUNCTION KEYS
KEY SYMBOL DESCRIPTION
POWER ON/OFF
MUTE
VOLUME +/-
CHANNEL +/-, C/P +/-
CHANNEL 1/2 DIGIT MODE
A/V SOURCE 1
INFORMATION/INDEX
NORMAL
HELP
PLAY
STOP
PAUSE
FAST FORWARD (SKY™ MENU RIGHT)
REWIND (SKY™ MENU LEFT)
SKY™ MENU UP
SKY™ MENU DOWN
RECORD (red circle)
TELETEXT ON
TV ON (FROM TEXT TO TV)
MIX (TV AND TELETEXT COMBINED)
HOLD PAGE (TELETEXT)
REVEAL (TELETEXT)
UPDATE (TELETEXT)
TIMER (TELETEXT)
TOP OF PAGE (TELETEXT)
BOTTOM OF PAGE (TELETEXT)
FASTEXT RED
FASTEXT GREEN
FASTEXT YELLOW
FASTEXT BLUE
CHANNEL/PROGRAMME STORE
CHANNEL/PROGRAMME STORE
C/P (CHANNEL PROGRAMME)
SHIFT KEY FUNCTIONS
KEY STROKES FUNCTION
SHIFT +/- (COLOUR)
SHIFT +/- (BRIGHTNESS)
SHIFT +/- (CONTRAST)
SHIFT Shift 1-9 contain the following
groups of functions
10+, 20+, 30+, 40+ ...
11, 12, 13, 14, 15 ...
PLEASE NOTE: You are advised to read the following
instructions fully, before attempting to program your Universal Remote
Control. The set-up procedure will cancel itself if no keys are pressed
for more than 10 seconds in order to protect your code against accidental
re-programming, and to conserve battery power. It would therefore be helpful
to you to understand the required programming steps, before you carry out
the actual set-up procedure.
1. DEVICE INDICATOR keys 5. Number keypad
2. STATUS INDICATOR 6. Text & VCR keypad
3. Infra-red transmitter 7.
Colour, Brightness, Contrast
4. Battery compartment 8. Fastext keys
RCx4 - UNIVERSAL REMOTE CONTROL
Congratulations! Your Universal Remote Control is a state-of-the-art device,
which replaces the main functions of several separate remote controls to oper-
ate infra-red controlled televisions (TV), videos (VCR), Freeview™ & satellite
receivers (SAT), cable TV boxes (CTV) & DVD players (DVD).
Your Universal Remote Control (URC) is pre-programmed in the factory. Simply
enter the correct device codes for your equipment and your URC is ready to
use. A DEVICE CODE LIST is included in the user’s manual.
INSTALLING BATTERIES
Your URC requires 2 fresh AAA-size (LR03) batteries (alkaline batteries
recommended) :-
1. Remove the battery cover on the back of your URC.
2. Insert the batteries ensuring that the polarity corresponds with the mark-
ings in the battery compartment.
3. Push the battery cover back in place.
91
...
MAIN FEATURES
2
4
1
3
5
6
8
7
Record
2