Philips 13PR19C1 CRT Television User Manual


 
26
POWER
SLEEPCLOCKCC
1
2
3
65
4
7
8
9
0
A/CH
SURF
STATUS
EXIT
MENU
MUTE
SMART SMART
SOUND PICTURE
CH
VOL
1
2
7
4
4
6
5
8
INPUT
SLEEPTIMER OFF
SmartLock
CLOCK
CC OFF
SmartLock
ACCESS CODE
_ _ _ _
SmartLock
ACCESS CODE
X X X X
BLOCK
CHANGE CODE
CHANNEL 5 BLOCKED
BY CHANNEL BLOCKING
ENTER CODE TO VIEW
_ _ _ _
CHANNEL 5
LOCK NO
CLEAR ALL
CHANNEL 5
LOCK YES
CLEAR ALL
BLOCKING OPTIONS
CHANNELS BLOCKED
MOVIE RATINGS
PARENTAL GUIDELINE
UNDERSTANDING THE SMARTLOCK™CONTROL (BLOCK CHANNEL)
A
fter your personal access code
has been set (see previous
page), you are now ready to select
the channels you want to block out
or censor.
Press the MENU button on the
remote to show the onscreen menu.
Press the CURSOR UP or
CURSOR DOWN button until
the words SmartLock are highlight-
ed.
Press the CURSOR RIGHT
button to display the
SmartLock Access screen.
Enter the correct access code
number. “XXXX” shows on the
Access Code display as you press
the NUMBERED buttons.
Press the CURSOR UP or
DOWN buttons until the word
BLOCK is highlighted. Press the
CURSOR RIGHT button then
highlight CHANNELS
BLOCKED.
Press the CURSOR RIGHT
button. Three options will be dis-
played; CHANNEL, LOCK or
CLEAR ALL.
With CHANNEL highlighted,
use the NUMBERED buttons to
enter the channel number you wish
to block.
Use the CURSOR DOWN
button to highlight the word
LOCK, then press the CURSOR
RIGHT button to select YES
(block) or NO (do not block). The
channel chosen is now blocked from
viewing.
Repeat steps 7 and 8 for any other
channels you wish to block from
viewing.
To clear blocked channels
follow the steps below:
Press the CURSOR DOWN
button until the words CLEAR
ALL are highlighted, then press the
CURSOR RIGHT button.
The screen will read “ALL
UNBLOCKED” for a moment. At
this point ALL the previously
blocked channels will be unblocked.
BEGIN
CHANNEL 5
LOCK YES
CLEAR ALL
CHANNEL ALL
LOCK NO
ALL UNLOCKED
When a blocked channel is viewed, this is what the screen will display. To view the blocked channel, sim-
ply enter the current access code. Note: Once the access code is entered ALL blocked channels will be
viewable until the TV is powered off. Once the set is turned off and then back on the previously blocked
channels will again be blocked.
Note: When the CLEAR
ALL option is selected, the
CHANNEL option will dis-
play ALL.
If at this point if you change
the LOCK option to YES,
ALL channels will be blocked
from viewing.