Filter
Top Products
Use programmed recording to automatically start and stop a
recording at a later date.
The TV-Video Combi requires the following information for
each programmed recording:
* the date you want to make the recording
* the programme number for the TV channel you want to
record
* the start and stop time of the recording
The TV-Video Combi stores all above mentioned information in
a so-called TIMER-Block. You can programme up to 6 TIMER
blocks a whole month in advance.
’VPS’ (Video Programming System) /
’PDC’ (Programme Delivery Control)
With ’VPS/PDC’, the TV station controls the start time and the
length of the programmed recording. If a TV programme
begins earlier or ends later than planned, the TV-Video Combi
switches on and off at the right time.
You must enter the start time exactly to the minuteduring
programming.
If you would like to programme a time that differs from the
VPS/PDC time, you must switch off ’VPS/PDC’.
Programming a recording
(with ’VIDEO Plus+’)
When entering the PlusCode programme number, the
TV-Video Combi receives all necessary information to
programme a recording.
a Press the TIMER k button on the remote control.
b Enter the entire PlusCode number. This number which
can consist of up to nine digits, is listed in your TV guide
next to the start time of the respective TV programme.
e.g.: 5-234-89 or 5 234 89
Enter 523489 for the PlusCode programming number.
DIf you make a mistake, you can clear your entry
using the CLEAR (CL) button.
VIDEO PLUS+
PLUSCODE NUMBER REP.
53124---- ONCE
REP.: SELECT STORE: OK
TIMER LIST: TIMER
c Use SELECT to select repeated daily or weekly recording.
’ONCE’: One-time recording.
’MO-FR’: Daily recordings from Monday through Friday.
’WEEK.’: Recordings on the same day every week.
d Confirm with the OK button. Upon confirmation the
respective information will appear on the TV screen.
TIMER PROGRAMMING
VPS
DATE REP. PROG. START PDC END
01 ONCE 01 20:15 ] 21:30
REP.: SELECT STORE: OK
DIf ’SELECT PROG. NR.’ appears on the screen,
the TV channel has not yet been allocated to the
PlusCode number. Select the desired programme
number using the number buttons 0..9 on the
remote control and confirm with the OK button.
DIf ’PLUSCODE NUMBER NOT VALID’ appears on
the screen, the PlusCode number is incorrect.
Correct your entry or cancel using the MENU button.
DIf ’MO-FR PROGRAMMING NOT POSSIBLE
FOR WEEKEND’ appears on the TV screen, you
have programmed a daily recording for the wrong
day. Daily programming can only be used for
recordings to be made from Monday to Friday.
7. PROGRAMMED RECORDING (TIMER)
20