Filter
Top Products
e If you want to switch ’VPS/PDC’ on or off, select the entry
field ’START’ using the buttons QSr or
SqP . Switch ’VPS/PDC’ on or off using the button
SELECT .If’]’ appears on the screen, ’VPS/PDC’ has
been switched on.
DPlease check the start time. The section ’VPS (Video
Programming System) / PDC (Programme Delivery
Control)’ contains further information regarding
’VPS/PDC’.
f If all information is correct, press the OK button.
DThe programming information has been stored in a
TIMER block.
g Insert a cassette that is not erase protected.
DTIMER recording only functions if the machine is not
being used for other video recorder functions like for
example for playback.
DIf the TV-Video Combi is used a few minutes before
beginning a programmed recording session for
playback (for example), ’PRESS OK TO START
RECORDING’ will appear on the screen.
Change cassettes or press the button STOP h if
you want to use this cassette for recording.
Confirm this message with the button OK ,to
continue the programmed recording session.
DDuring recording, the red recording light at the front
of the machine (RECORD5) will be alight.
DIf the end of the cassette is reached during a
recording, the TV-Video Combi will automatically
eject the cassette.
DIf you forgot to insert a cassette, ’NO CASSETTE’
will appear.
DIf you have inserted a cassette with erase protection
when you want to start a recording, the cassette will
be ejected automatically.
DIf ’ALL TIMERS OCCUPIED’ appears on the TV
screen when you press the TIMER k button, you
have used up all the available TIMER blocks. If you
want to clear or check a programmed recording
(TIMER block), select it with ;P q or =P r .
DProgramme number ’E1’ is provided for recording
from external sources (via the EXT scart socket).
Programming a recording
(without ’VIDEO Plus+’)
a Press the TIMER k button on the remote control twice.
The free TIMER block will be highlighted.
b Press the TIMER k button. The current information will
appear on the screen.
TIMER PROGRAMMING
VPS
DATE REP. PROG. START PDC END
01 ONCE 01 20:15 ] 21:30
REP.: SELECT STORE: OK
c Use the buttons SqP or QSr to select
different entry fields: ’DATE’ (Date), ’PROG.’ (Programme
number), ’START’ (Start time), ’END’ (End time).
Enter or change your information with ;P q or
=P r , or with the number buttons 0..9 .
DUse the SELECT button in the entry field ’DATE’to
select repetitive daily or weekly programming.
’ONCE’: One-time recording
’MO-FR’: Daily recordings from Monday through
Friday.
’WEEK.’: Recordings on the same day every week.
DUse the SELECT button in the entry field ’START’to
switch ’VPS/PDC’ on or off. If ’]’ appears on the
screen, the function has been switched on.
d If all information is correct, press the OK button.
DThe information has been stored in a TIMER block.
e Insert a cassette that is not erase protected.
DTIMER recording only functions if the machine is not
being used for other video recorder functions like for
example for playback.
21