Filter
Top Products
35
ACTIVATING THE SLEEPTIMER
Sleeptimer function allows you to select a time period in which the set will switch to standby
mode automatically upon reaching the selected time period. You have a choice of time period
starting from OFF up to a maximum of 240 minutes
1. Press the
(SLEEPTIMER) button to display the
time period.
2. Press the
(SLEEPTIMER) button repeatedly to
cycle through the various time periods and select the
time period of your choice.
Note
• During the last minute of a Sleep time setting, an
on-screen countdown will be displayed. Pressing any
button on the remote control during the countdown
will cancel the Sleep-timer.
• During the last 10 seconds of a Sleep timer setting,
an on-screen display will read Goodbye.
ACTIVATING THE ACTIVE CONTROL
➠
This feature automatically adjust settings for optimal picture quality continuously under any
signal conditions. You have a choice of 4 modes : ACTIVE CONTROL OFF, ACTIVE
CONTROL MIN, ACTIVE CONTROL MED and ACTIVE CONTROL MAX
HOW TO ACCESS AND SELECT THE ACTIVE CONTROL MODE
1. Press the
ACTIVE
CONTROL
(ACTIVE CONTROL) button
repeatedly to cycle through the various four
ACTIVE CONTROL modes and select your
desired mode.
2. Press
i
(OSD) button to exit menu from screen
or wait for the On-Screen Display to time out.
➠
ACTIVE CTRL MAX
ACTIVE CTRL OFF
ACTIVE CTRL MIN
SLEEP OFF
SLEEP 240
15PF9936/69 p27-38 8/15/03, 1:47 PM35