Filter
Top Products
7
Quick installation
When you turn on the TV set for the fi rst time, a
menu is displayed on screen. This menu prompts
you to select the country and language for the
menus:
If the menu is not displayed, press the MENU key to
display the menu.
Manual Store
Use the keys on the remote control to
select your country and validate with
.
Next select your language using the
keys
and validate with .
Country
. . .
Language
English
Auto store
Please wait
Prog. found 0
(1) (2)
Freq. 246.50 MHz
The search starts automatically. All the available TV
programmes and radio stations will be stored. This
operation takes a few minutes. The display shows
the progress of the search and the number of
programs found. At the end of the search, the menu
disappears.
To exit or interrupt the search, press MENU. If no pro-
gramme is found, consult the possible solutions p.15.
If the transmitter or cable network sends the au-
tomatic sort signal, the programs will be numbered
correctly. In this case, the installation is complete.
If this is not the case, you need to use the
Channel setting menu to number the programs
correctly. ( p.8)
This menu is used to store the programmes
one at a time.
Press the
MENU key.
With the cursor, select the Install menu then
Manual store
:
Info
Install
Main Control
Auto store6
Auto store
Manual store
Channel setting
Factory reset
Language
Country
Start ?
Info
Install
Main Control
Manual store6
Auto store
Channel setting
Factory reset
Language
Country
Manual store
Prog. No
Finetune
Store
System
Manual store
5
Info
Install
Main Control
Channel setting6
Auto store
Factory reset
Language
Country
Channel swap
Name edit
Channel sort
Channel edit
Manual store
4
Channel setting
Manual store: press . The search starts. Once
a programme is found, the scanning stops and its
name is displayed (when available). Go to the next
step. If you know the frequency of the required
programme, this can be entered directly using the
0 to 9 keys.
If no picture is found, consult the possible solutions
(p.15).
Prog. No.: enter the required number with the
or 0 to 9 keys.
Finetune: if the reception is not satisfactory,
adjust using the keys.
Store: press
. The program is stored.
Repeat steps to for each programme to store.
To quit the menus, press
MENU.
System: select Europe (automatic
detection*) or Western Europe (BG standard),
Eastern Europe (DK standard), United King-
dom (I standard) or France (LL’ standard).
Downloaded From TV-Manual.com Manuals