Filter
Top Products
23
EN
INTRODUCTION
PREPARATION
WATCHING TV
OPTIONAL SETTING
OPERATING DVD
DVD SETTING TROUBLESHOOTING
INFORMATION
Channel List
The channels selected here can be skipped when selecting the channels
using [CH + /
-
].
Those channels can still be selected with [the Number buttons].
1
Press [MENU] to display the main menu.
2
Use [Cursor K
/
L] to select “SETUP”, then press [OK].
Channel List
Add Channels
Antenna
Autoprogram
PICTURE
SOUND
FEATURES
LANGUAGE
DVD
SETUP
3
Use [Cursor K
/
L] to select “Channel List”, then press
[OK].
PICTURE
SOUND
FEATURES
LANGUAGE
DVD
SETUP
Channel List
Add Channels
Antenna
Autoprogram
4
Use [Cursor K
/
L] to select the channel you want to
remove, then press [OK].
Ch Select Watch/Skip
Back
BACK
OK
Highlight channels for Ch Up/Down key
selection.
11.2
11.3
DTV
DTV
PICTURE
SOUND
FEATURES
LANGUAGE
DVD
SETUP
DTV 11.1
• The channel display for the removed channel
darkens. You will not be able to select the channel
again using [CH
+ /
-
].
• To reactivate a removed channel, use [Cursor K
/
L] and
press [OK]. The registered channels are highlighted.
• When you remove a main channel, its subchannels
are removed as well.
Note:
• The channel with the “DTV” indicated on the display is
ATSC. Otherwise the channel is NTSC.
5
Press [MENU] to exit.
Add Channels
This function lets you add the channels that were not added by the
autoprogram due to the receptible condition at the initial setting.
1
Press [MENU] to display the main menu.
2
Use [Cursor K
/
L] to select “SETUP”, then press [OK].
Channel List
Add Channels
Antenna
Autoprogram
PICTURE
SOUND
FEATURES
LANGUAGE
DVD
SETUP
3
Use [Cursor K
/
L] to select “Add Channels”, then press
[OK].
Channel List
Add Channels
Antenna
Autoprogram
PICTURE
SOUND
FEATURES
LANGUAGE
DVD
SETUP
4
Use [the Number buttons] to enter the number of the
channel you want to add, then press [OK].
11
For analog channels, select a channel to be
added using number keys.
For digital channels, you must perform
Autoprogram function.
Add channels
Ch Change
Back
BACK
PICTURE
SOUND
FEATURES
LANGUAGE
DVD
SETUP
5
Press [MENU] to exit.
Note:
• If setup completes successfully,
“Added to the channel list” is displayed.
• If external input is used, it is not possible to register the
channel and “Unavailable” will be displayed on the TV
screen.
• By using [CH + /
-
], you can select the memorized
channels only.