Filter
Top Products
27
English
Connect a digital home theater amplifi er
DIGITAL AUDIO
IN
OUT
For legal reasons, the digital audio signal can be muted for
copy-protected PCM audio qualities on accessory devices connected
through HDMI.
Connect a PC
Connect a PC with an VGA connector at the back.
OUT
IN
IN
IN
IN
IN
IN
VGA
VGA
VGA
STEREO
STER O
MINI-PLUG AUDIO
M NI-P UG AUDIO
STEREO
MINI-PLUG AUDIO
OUT
Connect a PC with an S-Video connector at the side.
AUDIO
AUDIO
IN
IN
AUDIO
IN
AUDIO
AUDIO
OUT
OUT
S-VIDEO
IN
IN
IN
Connect a set-top box via a composite connector
CABLE
RF IN
Set-top box
AUDIO L/R + VIDEO
OUT
RF OUT
IN
IN
RF IN
RF IN
IN
RF IN
If your device has an S-VHS video jack, improve the picture quality as
follows:
Connect an S-Video cable to the S-Video input of VIDEO.
Connect the audio cables to the audio L and R input jacks of
VIDEO.
Note
When you use an S-Video connector, do not connect any device to the Composite
video jack.
Only the left loudspeaker reproduces sound for mono equipment. Use a mono to
stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
•
•
Connect a DVD player/recorder via component video
output connectors (YPbPr) and analog audio
Selected TV models can display 1080i, 720p and 480p DTV signals
when connected to a DTV set-top box. Set the output of the cable box
to either 1080i, 720p or 480p. A DTV signal must be available in your
area.
DVD / Set top box
YPbPr
AUDIO L/R
AUDIO /R
IN
IN
IN
IN
AUDIO L/R
OUT
OUT
IN
IN
•
•
EN