Philips 20PF4110S/58 Flat Panel Television User Manual


 
3
12
MENU
VOL
P
564
879
0
3
--
++
.
[
Á
-
ª
`
ù
SMART
SMART
Ë
¤
ı
AV
Remote Control Keys for LCD TV Functions
Sound mode
Used to force programmes in
Stereo and Nicam Stereo to Mono
or,for bilingual programmes,to
choose between Dual I or Dual II.
The Mono indication is red when in
forced position.
16:9 Format (p.7)
Ó
Teletext key (p.8)
Sleeptimer
To select the length of time before
the set automatically switches to
standby (from 0 to 240 minutes)
Smart picture and sound
Used to access a series of
predefined
picture and sound
settings.
The
personal position relates to
settings selected from the menus.
Teletext keys (p.8)
Menu
To call up or exit the menus.
AV
To display Source List to
select TV or peripheral
equipment connected to EXT1,
EXT2/S-VHS2, AV/S-VHS3,
PC or HD (p.11).
Cursor
These 4 keys are used to move
around the menus.
Volume
To adjust the sound level
Mute
To mute or restore the sound.
Screen information
To display / remove the programme
number,the sound mode and the
time remaining on the timer.Hold
down for 5 seconds to permanently
display the programme number on
the screen.
Standby
To set the TV to standby mode.To
switch the TV set on again,press
b,P @#or 09.
Teletext (p.8)
Surround Sound
To activate / deactivate the surround
sound effect.For models equipped
with Virtual Dolby Surround*,you
can experience Dolby Surround Pro
Logic sound effects.
Selecting TV programmes
To move up or down a programme.
The number and the sound
mode are
displayed for a few seconds.
For some TV programmes the title of
the programme appears at the
bottom of the screen.
Previous programme
To access the previously viewed
programme.
Numerical keys
For direct access to programmes.
For a 2 digit programme number,
the 2
nd
digit must be entered
before the dash disappears.
* Manufactured under license from Dolby Laboratories.“Dolby”and the double-D symbols are trademarks of Dolby Laboratories.
List of programmes
To display / clear the list of
programmes.
Use the keys
îÏ to
select a programme and the key ¬to
display it.