Philips 21PT2684/48 Flat Panel Television User Manual


 
3
Tuning in to channels
Quick installation (first use)
The following operations are all described in the enclosed quick
installation guide.We advise you to use it.
The first time you switch on the television, a menu appears on the screen.
This menu asks you to choose the language of the other menus.
If the menu does not appear, hold down the PROGRAM- and PROGRAM+ keys
on the set for 4 seconds to bring it up.
æ Use the keys numbered from to on the remote control to choose
your language (for English, press ).Another menu appears.
 Select your country (for GB, press ).
ê As soon as your country is entered, tuning in starts automatically.
The operation takes a few minutes.A display shows the search status and
the number of programmes found.When it has finished, the menu
disappears and the last programme is displayed.
If no programmes are found, refer to the chapter entitled Tips on p. 10.
® If the transmitter or the cable network broadcasts the automatic sort
signal, the programmes will be correctly numbered.
If not, the programmes found will be numbered in descending order
starting at 99,98, 97, etc. (or 79, 78,...).
Use the SORT menu to renumber them.
Some transmitters or cable networks broadcast their own sort parameters (region,
language, etc.).Where this is the case, make your choice using the keys and
confirm with .
æ Press the key.The main menu is displayed.
 Press once to select INSTALLATION, then press .
The INSTALLATION menu appears.The LANGUAGE option is activated.
ê Press 3 times to select SORT then press .
The SORT menu appears.The FROM option is activated.
® Select the programme you wish to renumber using keys or to .
Example: to renumber programme 78 as 2, press .
Select option A (key ) and enter the new number with keys
or to (for the example given, enter 2)
Ú Select EXCHANGE (key ) and press .The message EXCHANGED
appears, the exchange takes place ( to cancel). In our example,
programme 78 is renumbered as 2 (and programme 2 as 78).
º Select the option FROM (key ) and repeat stages ® to Ú as many times
as there are programmes to renumber.
î To exit from the menus,press .
To renumber the programmes found