Filter
Top Products
14 Operating instruction Peripherals
Satellite receiver, decoder, games, etc.
& Carry out the connections shown opposite.
é To optimise picture quality, connect the
equipment which produces the video signals
(digital decoder, games, etc) to AV1 in and
equipment which produces the S-VHS signals
(S-VHS and Hi-8 video recorders, certain DVD
drives to AV2 in and all other equipment to
either AV1 in or AV2 in.
& To connect to a hi-fi system, use an audio
connection cable and connect the “L” and
“R” outputs on the TV set to the “AUDIO
IN” “L” and “R” input on your hi-fi amplifier.
Make the connections as shown opposite.
With the
key, select AV or FRONT.
For a monophonic device, connect the audio
signal to the AUDIO L input.
Headphones
When headphones are connected, the sound
on the TV set will be cut. The VOL + or –
keys are used to adjust the volume level.
The headphone impedance must be between
32 and 600 Ohms.
Other equipment (where applicable)
Amplifier (where applicable)
Side connections (TV model dependant)
Connecting peripheral equipment
(Diagrams are for illustration only.
May differ from actual TV sets)
p13 - 14 12/28/04, 10:53 AM14