Filter
Top Products
Video recorder (only)
Carry out the connections featured opposite. Use a
good quality euroconnector cable.
If your video recorder does not have a euroconnector socke t ,
the only connection possible is via the aerial cabl e .You will
t h e r e fore need to tune in your video recorder's test signal and
assign it programme number 0 (refer to manual store, p. 5 ) .
To reproduce the video recorder picture, press .
Video recorder with decoder
Connect the decoder to the second euroconnector
socket of the video recorder.You will then be able to
record scrambled transmissions.
The television has 2 external sockets situated at the back of the set (EXT1 and EXT2).
The EXT1 socket has audio and video inputs/outputs and RGB inputs.
The EXT2 socket has audio and video inputs/outputs and S-VHS inputs.
To select connected equipment
Press the key to select EXT1, S-VHS2 (S-VHS signals from the
EXT2 socket), EXT2 and S-VHS3 or EXT3 for connections on the
front panel (according to the model),
Most equipment (decoder, video recorder) carries out the switching itself.
10
Satellite receiver,decoder, CDV,games, etc.
Carry out the connections featured opposite.
To optimise picture quality,connect the equipment
which produces the RGB signals (digital decoder, games,
certain CDV drives,etc.) to EXT1, and the equipment
which produces the S-VHS signals (S-VHS and Hi-8
video recorders) to EXT2 and all other equipment to
either EXT1 or EXT2.
Video recorder
Other equipment
Connecting peripheral equipment