Filter
Top Products
2
æ Positioning the television set
Place your TV on a solid,stable surface.
To avoid any dangerous situations and operating fault, do not place
anything on the TV set and leave a space of at least 5cm around the
appliance.
 Connections
• Insert the aerial plug into the M socket at the rear of the set.
• Insert the mains plug into a wall socket (220-240 V / 50 Hz).
ê Remote control
Insert the two R6-type batteries (supplied) making sure they are the
right way round.
In an effo rt to help protect the env i r o n m e n t , the batteries supplied with this
t e l evision do not contain mercury or nickel cadmium. Please do not discard your
used batteries if you have access to a recycling facility (if in doubt, consult your
d e a l e r ) .
® Switching on
Press the on/off key to switch on the television.
A red indicator comes on and the screen lights up.
If the television remains in standby mode, press the P on the remote
control.
The indicator flashes when you use the remote control.
The television set has 4 keys which are located on the front or the top
of the set depending on the model.
The VOLUME - + (- a +) keys are used to adjust sound levels.
The PROGRAM - + (- a +) keys are used to select the required
programmes.
To access the menus,simultaneously hold down the VOLUME - and
VOLUME + keys.The PROGRAM - + keys may then be used to select an
adjustment and the VOLUME - + keys to make that adjustment.
To exit from the menu s ,hold down the 2 VOLUME - and VOLUME + key s .
Note: when the LOCK function is activated, these keys are unavailable (refer to
FEATURES menu on page 7).
Installing the television set
The keys on the TV set